Bathrooms

Apartments, depending on type and location, are fitted with the following sanitary wear and fittings:

Phase 1

	Specification
Item	Flank A (mainly)	Flanks B & C (mainly)
Bath	Villeroy & Boch - ‘Rebana’ Ref BA170PAR3LIV	Kaldewei Puro 653
Bath filler & integral waste	VADO WG-61552	Grohe Tallentofill code 19952, concealed parts code 28991
Bath/shower diverter	VADO CEL-148B/2/SQ	Grohe Rapido T code 35500, faceplate Grohe 3000 code 19567, bath faceplate Grohe 3000 code 19568
Toilet	Vitra ‘Retro/Pure Style’ ref 5160 with soft closing seat ref 55-003-009	Vitra Zentrum wall hung code 5785, soft close seat code 009
Frame to WC	Grohe Rapid SL ref 38773	Grohe Rapid SL ref 38773
WC push plate	Grohe Skate Cosmopolitan	Grohe Skate Cosmopolitan ref 38732
Basin	Vitra ‘Retro/Pure Style’ ref 5214 with semi pedestal ref 5157B003-0156	Vitra Zentrum code 5632 with semi pedestal code 5821
Bathroom tap	Mono basin mixer tap ref VADO 200-100	Grohe Concetto Ecojoy code 32204
1 bed & en suite shower head (selected types)	Grohe ref 27253	Grohe ref 27253
1 bed & en suite thermostatic shower valves	VADO CEL-148B/SG-3/4	Grohtherm 3000 Cosmopolitan code 19568
1 bed & en suite shower door		Lakes bathrooms semi frameless slider door 1500 wide, ref LKV2S150 05
En suite shower door (2 bed)	Lakes bathrooms framed bi-fold door 1000 wide, ref LK1B1000 05
En suite shower door (3 bed)	Lakes bathrooms semi frameless slider door 1500 wide, ref LKV2S150 05
Heated towel rail	Sol*Aire Bray electric towel rail - SW580P 500w x 800h	Sol*Aire Bray electric towel rail - SW580P 500w x 800h

Phase 2

t

Notes

Water usage

To reduce water consumption the toilet uses a dual flushing system.

Care and maintenance instructions

Basins and baths

Trays and tops should be cleaned and dried as soon as possible after use to prevent build up of soap residue. If the water is hard, insoluble lime salts and grime will harden on the surface and become increasingly difficult to remove. To prevent scratching of bathroom fittings it is important that only non-abrasive cleaners are used. In the interests of safety, baths and shower trays must not be polished with wax or silicone polish. A sealant has been applied around the bath and/or shower tray where water splashes occur. This should be checked regularly and maintained as required to ensure water resistance.

Shower heads

Heads should be cleaned and de-scaled if necessary.

Taps and hinges

Under no circumstances should cleaners containing any abrasive agents or chemicals be used. The use of cleaners of this type, whether on stainless steel, chrome, gold or white taps or hinges, will abrade any protective surfaces and cause corrosion. Soapy water, silicone or wax polishes should be used instead.

Toilet cisterns

Each toilet cistern incorporates an integral overflow system. This system should reduce the amount of water wasted due to a faulty cistern valve and alert residents more quickly to a problem. In the event of the valve failing to stop water entering the toilet cistern:

• The toilet pan flush buttons may be disabled and it may not be possible to flush the toilet
• The excess water will continuously be disposed of directly into the toilet pan

Access to the cistern is gained by removing the flushing button panel (Images 1 and 2).

Image 1	Image 2