Bathrooms: Difference between revisions
mNo edit summary |
|||
Line 1: | Line 1: | ||
{{DISPLAYTITLE:Bathroom}} | |||
Apartments are fitted with the following sanitary wear and fittings: | Apartments are fitted with the following sanitary wear and fittings: | ||
Revision as of 14:45, 21 August 2020
Apartments are fitted with the following sanitary wear and fittings:
Bath
Villeroy & Boch - ‘Rebana’ Ref BA170PAR3LIV
Bath filler & integral waste
VADO WG-61552
Bath/shower diverter
VADO CEL-148B/2/SQ
Toilet
Vitra ‘Retro/Pure Style’ ref 5160 with soft closing seat ref 55-003-009
Frame to WC
Grohe Rapid SL ref 38773
WC push plate
Grohe Skate Cosmopolitan
Basin
Vitra ‘Retro/Pure Style’ ref 5214 with semi pedestal ref 5157B003-0156
Bathroom tap
Mono basin mixer tap ref VADO 200-100
En suite shower head (selected types)
Grohe ref 27253
En suite thermostatic shower valves
VADO CEL-148B/SG-3/4
En suite shower door (2 bed)
Lakes bathrooms framed bi-fold door 1000 wide, ref LK1B1000 05
En suite shower door (3 bed)
Lakes bathrooms semi frameless slider door 1500 wide, ref LKV2S150 05
Heated towel rail
Sol*Aire Bray electric towel rail - SW580P 500w x 800h
Notes
Water usage
To reduce water consumption the toilet uses a dual flushing system.
Care and maintenance instructions
Basins and baths
Trays and tops should be cleaned and dried as soon as possible after use to prevent build up of soap residue. If the water is hard, insoluble lime salts and grime will harden on the surface and become increasingly difficult to remove. To prevent scratching of bathroom fittings it is important that only non-abrasive cleaners are used. In the interests of safety, baths and shower trays must not be polished with wax or silicone polish. A sealant has been applied around the bath and/or shower tray where water splashes occur. This should be checked regularly and maintained as required to ensure water resistance.
Shower heads
Heads should be cleaned and de-scaled if necessary.
Taps and hinges
Under no circumstances should cleaners containing any abrasive agents or chemicals be used. The use of cleaners of this type, whether on stainless steel, chrome, gold or white taps or hinges, will abrade any protective surfaces and cause corrosion. Soapy water, silicone or wax polishes should be used instead.
Toilet cisterns
Each toilet cistern incorporates an integral overflow system. This system should reduce the amount of water wasted due to a faulty cistern valve and alert residents more quickly to a problem. In the event of the valve failing to stop water entering the toilet cistern:
- The toilet pan flush buttons may be disabled and it may not be possible to flush the toilet
- The excess water will continuously be disposed of directly into the toilet pan
Access to the cistern is gained by removing the flushing button
panel (Image 1).